? 221 west industry court deer park, ny 11729 (631) 586 7600, fax 631 242 9798 ? ? world wide web - www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron ___ semiconductor technical data data sheet 355, rev. - fixed negativetive 1.5 amp 15 volt regulator features: isolated hermetic package similar to industry type 7915 equivalent military part type 5982-8874801ux maximum ratings all ratings are at t c = 25 c unless otherwise specified. parameter conditions maximum units input voltage v o = 15v - 35 vdc ambient operating temperature range (t a ) - - -55 to +150 c storage temperature range - - -65 to +150 c thermal resistance (r jc ) - - 4.2 c/w rated power t c = +25 c - 30 w electrical cahracteristics symbol parameter conditions min. typ. max. units v o output voltage t j = 25 c -1485 -15.0 -15.15 v 5 ma i o 1a p 15w -14.25 -15.75 v v rline line regulation - 5.0 25 mv t j = 25 c, v in = -17.5v to -30v v in = -20v to -26v - 3.0 15 mv v rload load regulation t j = 25 c 5 ma i o 1.5a 250 ma i o 750ma - - - - 35 21 mv mv i q quiescent current t j = 25 c - 1.5 3.0 ma ? i q quiescent current with line - - 0.5 ma change with load, 5 ma i o 1a - - 0.5 ma v do dropout voltage t j = 25 c, i o = 1a - - 2.5 v i omax peak output current t j = 25 1.5 - 3.3 a i os short circuit current v in = -35v t c = 25 c -55 c t c + 125 c - - 1.2 2.8 a ? v in ? v out ripple rejection f = 120hz 54 70 - db n o output noise voltage t a = 25 c, f = 10hz f 100khz - 375 - v ? v out ? t long term stability t c = 25 c, t=1000 hours - - 150 mv note: conditions unless otherwise noted: i out = 500 ma, c in = 2.2 f, c out = 1 f, 0 c t j +125 c, power dissipation = 1.5w. SHD52626
? 221 west industry court deer park, ny 11729 (631) 586 7600, fax 631 242 9798 ? ? world wide web - www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 355, rev. - mechanical dimensions: in inches / mm to-257 123 . 200 .190 (5 . 08 4.82) .045 .035 (1.14 0.89) .120(3.05) bsc .430 .410 (10.92 10.41) .420 .410 (10.67 10.41) .665 .645 (16.89 16.38) .537 .527 (13.64 13.39) 1.132 1.032 (28.75 26.21) .035 .025 (0.89 0.63) 3 places .100(2.54) bsc 2 places .150 .140 (3.81 3.56) dia. pinout table type pin 1 pin 2 pin 3 to - 257, -15v regulator ground v in v out SHD52626 disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
